Searching for flash-layout... Found flash-layout at 7fc00 Press ESC to enter BOOT MENU mode. RGLoader 4.0.16.1.56.80.1.1 Booting an active image in 3 seconds Uncompressing Linux............................................................................................................... Linux version 2.4.21openrg-rmk1 #2 Tue Nov 11 11:00:27 PST 2008 CPU: XScale-IXP4xx/IXC11xx revision 2 Machine: MI424-WR On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,115200 root=/dev/ram0 rw nohalt Using IXP425 Timer 0 as timer source Calibrating delay loop... 532.48 BogoMIPS Memory: 32MB = 32MB total Memory: 26476KB available (901K code, 4777K data, 224K init) XScale Cache/TLB Locking Copyright(c) 2001 MontaVista Software, Inc. Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX PCI: bus0: Fast back to back transfers enabled PCI: 13.1: PCI device 17e6:0021 got irq 25 PCI: 14.1: PCI device 168c:001a got irq 24 PCI: 15.1: PCI device 17e6:0021 got irq 23 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Random: 0xd2e42810 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xff000003 (irq = 15) is a XScale UART ttyS01 at 0xff001003 (irq = 13) is a XScale UART NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller VFS: Mounted root (tmpfs filesystem). Mount of initial cramfs successful Freeing init cramfs memory: 64K Freeing init memory: 224K Mounting cramfs image at 'cramfs' insmod: add-symbol-file PATH/kos_lib.o 0xc2802060 -s .data 0xc280d250 -s .bss 0xc280dfe4 loading license key: Actiontec License insmod: add-symbol-file PATH/ixp425_flash_mod.o 0xc2812060 -s .dcfi_cmdset_0001: Erase suspend on write enabled ata 0xc2812420 -s .bss 0xc2812460 Using buffer write method Using predefined MTD partitions. Creating 1 MTD partitions on "IXP425 Flash Bank 0": 0x00000000-0x00800000 : "openrg" insmod: add-symbol-file PATH/kleds_mod.o 0xc3015060 -s .data 0xc301560c -s .bss 0xc3015668 Searching for flash-layout... Found flash-layout at 7fc00 Press ESC to enter BOOT MENU mode. insmod: add-symbol-file PATH/act_kconf_mod.o 0xc303a060 -s .data 0xc303a0c0 -s .bss 0xc303a120 insmod: add-symbol-file PATH/log_chardev.o 0xc303c060 -s .data 0xc303c5b8 -s .bss 0xc303c624 insmod: add-symbol-file PATH/csr.o 0xc303e060 -s .data 0xc30504d0 -s .bss 0xc30560d0 Module init. insmod: add-symbol-file PATH/ixp425_csr_init_mod.o 0xc305f060 -s .data 0xc305f3e8 -s .bss 0xc305Intel CSR QMGR & NPE(s) init done. f404 insmod: add-symbol-file PATH/ixp425_eth_mod.o 0xc3061060 -s .datInitializing ixp425_eth driver 0.0.8 a 0xc3062f70 -s .bss 0xc3063014 Found PHY 0 at 1 Found PHY 1 at 2 Found PHY 2 at 3 Found PHY 3 at 4 Found PHY 4 at 5 PHY 0 MAC address is: 04:04:04:04:04:04 PHY 1 MAC address is: 06:06:06:06:06:06 insmod: add-symbol-file PATH/igmp_proxy_mod.o 0xc3065060 -s .data 0xc3066490 -s .bss 0xc306650c insmod: add-symbol-file PATH/rg_bridge.o 0xc3068060 -s .data 0xc306ca60 -s .bss 0xc306ca8c insmod: add-symbol-file PATH/tcp_mss.o 0xc3070060 -s .data 0xc3070400 -s .bss 0xc3070428 insmod: add-symbol-file PATH/frag_cache_mod.o 0xc3072060 -s .data 0xc3073628 -s .bss 0xc3073628 insmod: add-symbol-file PATH/jfw.o 0xc3075060 -s .data 0xc3093040 -s .bss 0xc3095094 insmod: add-symbol-file PATH/rg_dhcp_pktfil.o 0xc30c8060 -s .data 0xc30c8950 -s .bss 0xc30c8a40 insmod: add-symbol-file PATH/rg_ipv4.o 0xc30ca060 -s .data 0xc30IPV4 device driver registered ca220 -s .bss 0xc30ca25e insmod: add-symbol-file PATH/krgldr_module.o 0xc30cc060 -s .data 0xc30cc308 -s .bss 0xc30cc360 insmod: add-symbol-file PATH/rt2560.o 0xc30ce060 -s .data 0xc30fed38 -s .bss 0xc310240c insmod: init_module: rt2560: No such device Failed insmod rt2560 (No child processes) insmod: add-symbol-file PATH/wlan.o 0xc30ce060 -s .data 0xc30ed780 -s .bss 0xc30eda48 wlan: 0.8.4.2 (Atheros/multi-bss) insmod: add-symbol-file PATH/wlan_wep.o 0xc30f0060 -s .data 0xc30f0f80 -s .bss 0xc30f0fae insmod: add-symbol-file PATH/wlan_xauth.o 0xc30f3060 -s .data 0xc30f3198 -s .bss 0xc30f31c8 insmod: add-symbol-file PATH/wlan_scan_ap.o 0xc30f5060 -s .data 0xc30f5cb8 -s .bss 0xc30f5cea insmod: add-symbol-file PATH/ath_hal.o 0xc30f7060 -s .data 0xc3120450 -s .bss 0xc3125a60 ath_hal: 0.9.17.1 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413, REGOPS_FUNC) insmod: add-symbol-file PATH/ath_rate_atheros.o 0xc3129060 -s .dath_rate_atheros: Version 2.0.1 ata 0xc312ae10 -s .bss 0xc312f144 Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved insmod: add-symbol-file PATH/ath_pci.o 0xc3131060 -s .data 0xc3141bb8 -s .bss 0xc3142180 ath_pci: 0.9.4.5 (Atheros/multi-bss) wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: mac 7.8 phy 4.5 radio 5.6 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Atheros 5212: mem=0x49ff0000, irq=24 insmod: add-symbol-file PATH/wlan_tkip.o 0xc315e060 -s .data 0xc31604f0 -s .bss 0xc316051f insmod: add-symbol-file PATH/wlan_acl.o 0xc3162060 -s .data 0xc3wlan: mac acl policy registered 162850 -s .bss 0xc316287e insmod: add-symbol-file PATH/crypto_mod.o 0xc3164060 -s .data 0xc3165a14 -s .bss 0xc3165a90 insmod: add-symbol-file PATH/aes_mod.o 0xc3167060 -s .data 0xc3169db8 -s .bss 0xc3169e44 insmod: add-symbol-file PATH/wlan_ccmp.o 0xc3170060 -s .data 0xc31713e0 -s .bss 0xc317140f insmod: add-symbol-file PATH/ppp.o 0xc3173060 -s .data 0xc317a02c -s .bss 0xc317a170 insmod: add-symbol-file PATH/btn.o 0xc317c060 -s .data 0xc317c568 -s .bss 0xc317c614 insmod: add-symbol-file PATH/qos_ingress.o 0xc317e060 -s .data 0xc317e138 -s .bss 0xc317e168 insmod: add-symbol-file PATH/ks8995m_mod.o 0xc3180060 -s .data 0xc3181860 -s .bss 0xc31818c4 Kendin HW Switch: VLAN Group 15 used for default VLAN 0 Kendin HW Switch: PVID of all ports set to 0 Kendin HW Switch: Configured as VLAN Switch Kendin ID: 95:09 Kendin port 1 status: 00 Kendin port 2 status: 80 Kendin port 3 status: 80 Kendin port 4 status: 80 Kendin port 5 status: 00 insmods failed insmod: add-symbol-file PATH/clnkdrv2210.o 0xc3183060 -s .data 0xc31afcb8 -s .bss 0xc31b14b8 Linux Clink Ethernet driver version 1.02.26 start up wifi0 and create ath0 ath0 Freeing modfs memory: 2052K -------------------------------------------------- Version: 4.0.16.1.56.0.10.7.12 Platform: MI424-WR Compilation Time: 11-Nov-08 18:53:46 Tag: Nrel-4-0-16-1-56-0-10-7-12 Compilation Flags: ACTION_TEC_FAIRPOINT=y CONFIG_SUPPORT_524_2A=y CONFIG_MULTI_CARD=y LIC=../jpkg_actiontec.lic DIST=MI424WR -------------------------------------------------- DHCP server IP: 192.168.1.1 PHY 0 MAC address is: 00:26:62:7f:35:02 PHY 0 MAC address is: 00:26:62:7f:35:02 ixp1: Entering promiscuous mode device ixp1 entered promiscuous mode SWITCH LOGIC reset 0 Bridge Managed Ports: 4 STP: ixp1/0 enters blocking mode STP: ixp1/1 enters blocking mode STP: ixp1/2 enters blocking mode STP: ixp1/3 enters blocking mode ath0: link down device ath0 entered promiscuous mode device ath0 left promiscuous mode device ath0 entered promiscuous mode Bridge Managed Ports: 1 STP: ath0 enters blocking mode Bridge Managed Ports: 4 STP: ixp1/0 enters blocking mode STP: ixp1/1 enters blocking mode STP: ixp1/2 enters blocking mode STP: ixp1/3 enters blocking mode ath0: link up ss_last: 11 ch = 0, chan = 1, rssi = 50 ch = 1, chan = 2, rssi = 4 ch = 2, chan = 3, rssi = 0 ch = 3, chan = 4, rssi = 0 ch = 4, chan = 5, rssi = 0 ch = 5, chan = 6, rssi = 18 ch = 6, chan = 7, rssi = 0 ch = 7, chan = 8, rssi = 14 ch = 8, chan = 9, rssi = 0 ch = 9, chan = 10, rssi = 14 ch = 10, chan = 11, rssi = 15 Dirtyness = 11.12.3.4 - 4.13.4.13 - 4.13.12.100 - 100.100 ApAutoSelectChannel Rule 2 pick up ch#1 Username: STP: ixp1/3 exits blocking mode STP: ixp1/2 exits blocking mode STP: ixp1/1 exits blocking mode STP: ixp1/0 exits blocking mode STP: ath0 exits blocking mode Password: admin Username: admin1 Wireless Broadband Router> ifconfig Device br0 (0x354648) - type=40(Bridge) state=running changed=0 is_sync=1 has_ip=1 metric=4 MTU=1500 MAC=00:26:62:7f:35:01 depend_on_list=ixp1(0x3547c8), clink1(0x354948), ath0(0x354b68), ra0(0x354aa8) next=ixp0(0x354708) ip=192.168.1.1, netmask=255.255.255.0 Device ixp0 (0x354708) - type=18(Ethernet) state=down changed=0 is_sync=0 has_ip=1 metric=3 MTU=1500 MAC=00:26:62:7f:35:04 depend_on_list=None next=ixp1(0x3547c8) ip=0.0.0.0, netmask=0.0.0.0 Device ixp1 (0x3547c8) - type=63(Ethernet) state=running changed=0 is_sync=1 has_ip=0 metric=4 MTU=1500 MAC=00:26:62:7f:35:02 depend_on_list=None next=clink0(0x354888) Device clink0 (0x354888) - type=64(Coax) state=down changed=0 is_sync=0 has_ip=1 metric=3 MTU=1500 MAC=00:26:62:7f:35:05 depend_on_list=None next=clink1(0x354948) ip=0.0.0.0, netmask=0.0.0.0 Device clink1 (0x354948) - type=64(Coax) state=down changed=0 is_sync=1 has_ip=0 metric=4 MTU=1500 MAC=00:26:62:7f:35:03 depend_on_list=None next=ra0(0x354aa8) Device ath0 (0x354b68) - type=73(Wireless Access Point) state=running changed=0 is_sync=1 has_ip=0 metric=4 MTU=1500 MAC=00:1f:90:e8:53:77 depend_on_list=None next=ppp0(0x354c28) Device ppp0 (0x354c28) - type=29(PPPoE) state=disabled changed=0 is_sync=0 has_ip=1 metric=1 MTU=1492 depend_on_list=ixp0(0x354708) next=ppp1(0x354ce8) ip=0.0.0.0, netmask=0.0.0.0 Device ppp1 (0x354ce8) - type=29(PPPoE) state=disabled changed=0 is_sync=0 has_ip=1 metric=1 MTU=1492 depend_on_list=clink0(0x354888) next=None ip=0.0.0.0, netmask=0.0.0.0 Returned 0